Electrical connection
7
Electrical connection
The barcode readers of the BCL 500
connectors. This ensures unique connection assignments.
The additional USB interface is used for configuring the device.
The two product series BCL 500
as multiNet plus master or slave.
BCL 500
i
(Stand alone or multiNet plus master)
BCL 501
i
(multiNet plus slave)
For the locations of the individual device connections, please refer to the device detail shown
below.
Notice!
The corresponding mating connectors and ready-made cables are available as accessories
for all connections. For additional information, refer to chapter chapter 13.
Figure 7.1:
70
i
and BCL 501
Location of the electrical connections
BCL 500
i
series are connected using variously coded M12
i
differ in their interfaces and in their function
HOST / BUS IN
RS 232 / RS 422
RS 485
i
i
\ BCL 501
BUS OUT
RS 485
RS 485
Leuze electronic