Table of Contents
Advertisement
Online commands
11.1.1 General 'online' commands
Software version number
Command
Description
Parameter
Acknowledge-
ment
Notice!
This command returns the major release number of the software packet. This major release
number also appears on the display during start-up.
This command can be used to check whether the connected host or service computer is
properly connected and configured. If you do not receive an acknowledgement, please
check interface connections, protocol and service switches.
Software reset
Command
Description
Parameter
Acknowledge-
ment
124
Requests device version information
no
'BCL 500i SM 100 V 1.3.8 2008-02-15'
The first line contains the device type of the BCL 500
lowed by the device version number and version date. (The data which
is actually displayed may vary from the values given here.)
Carries out a software reset. The device is restarted and reinitialised,
leaving it in the same state as when the supply voltage is switched on.
no
'S' (start signal)
i
BCL 500
'V'
'H'
i
\ BCL 501
i
\ BCL 501
i
, fol-
Leuze electronic
Advertisement
Table of Contents
