Table of Contents
Advertisement
Device description
4.8
Heater
For low-temperature applications to min. -35°C (e.g. in cold storage), the barcode readers
of the BCL 500
and these barcode readers purchased as separate device models.
4.9
External parameter memory
The optionally available external parameter memory –
based on a USB memory stick (compatible with
version 1.1) – is housed in an external hood with inte-
grated connectors which cover the USB service inter-
face when installed (IP 65). By having available a
copy
of
BCL 500
i
\ BCL 501
makes it easy and reduces the time needed to replace
the BCL 500
tion of the exchanged device is thereby omitted.
The procedure for transferring the configuration with the aid of the external parameter
memory is described on page 120.
The delivery contents of the external parameter memory include the hood with integrated
connectors with unscrewable cover and the USB memory stick.
Figure 4.10: External parameter memory
Notice!
To mount, the cover of the hood with integrated connectors must be unscrewed. The tube
is then screwed onto the USB connection on the BCL
memory stick is plugged into the connection and the hood with integrated connectors closed
with the cover in order to ensure protection class IP 65.
28
i
\ BCL 501
i
series can optionally be permanently fitted with a built-in heating
the
current
parameter
i
, the external parameter memory
i
i
\ BCL 501
on site. A manual configura-
BCL 500
set
of
the
500i
i
i
\ BCL 501
\ BCL
501i
after which the USB
Leuze electronic
Advertisement
Table of Contents
