Table of Contents
Advertisement
8.3.4
Service menu
Diagnostics
This menu item is used exclusively for service purposes by Leuze electronic.
Status messages
This menu item is used exclusively for service purposes by Leuze electronic.
8.3.5
Actions menu
Start decoding
Here, you can perform a single reading via the display.
Use the
ing field of the BCL
The laser beam is switched on and the following display appears:
Actions
o Stop decoding
zzzzzzzzz
Once the barcode is detected, the laser beam is switched off again. The read result
zzzzzzzzz
displayed again.
Start alignment
The alignment function makes it easy to align the BCL 500
displaying the read quality.
Use the
the reading field of the BCL
At first, the laser beam is switched on continuously, enabling you to position the barcode
securely in the reading field. Once the barcode is read, the laser beam is switched off briefly
and the following display appears:
Actions
o Stop alignment
xx
xx
zzzzzz:
Once the barcode has been detected, the laser beam starts to flash.
The flash frequency provides visual information on the read quality. The faster the laser
beam flashes, the higher the read quality.
Leuze electronic
button to activate the single read operation and place a barcode in the read-
500i
\ BCL 501i.
is shown directly in the display for about 1s. After that, the Actions menu is
button to activate the Justage (alignment) function and place a barcode in
zzzzzzzzz
Read quality in % (scans with info)
Contents of the decoded barcode.
BCL 500
500i
\ BCL 501i.
i
i
\ BCL 501
Display and control panel
i
\ BCL 501
i
by optically
101
Advertisement
Table of Contents
