Table of Contents
Advertisement
9.2.2
Installing the USB driver
In order for the BCL 500
USB driver must be installed once on your PC. To do this, you must have administrator
privileges.
Please proceed according to the following steps:
Start your PC with administrator privileges and log on.
Load the CD included in the delivery contents of your BCL
drive and start the "setup.exe" program.
Alternatively, you can also download the setup program from the internet at
www.leuze.de.
Follow the instructions provided by the setup program.
Upon successful installation of the USB driver, a BCL 50xi icon
the desktop.
To check: In the Windows Device Manager, a device called "Leuze electronic, USB Remote
NDIS Network Device" appears under the "Network adapter" device class following
successful USB registration.
Leuze electronic
i
\ BCL 501
i
to be automatically detected by the connected PC, the
i
BCL 500
\ BCL 501
Leuze webConfig tool
500i
\ BCL
automatically appears on
i
501i
in the CD
105
Advertisement
Table of Contents
