Table of Contents
Advertisement
Display and control panel
Table 8.4:
Level 3
BUS OUT
1)
If the BCL 500
tocol defines how the data between the BCL 500
ing protocol is a character-based protocol for the transmission of ASCII characters. It
groups the characters to be transmitted into a datablock and frames the block with control
characters. Various block checking methods are optionally available for protecting the
integrity of the data.
2)
The decimal value of the desired ASCII character must be entered here. For a CR (Car-
riage Return) character for example, you need to enter 13. An ASCII character table can
be found on page 150.
8.3.3
Language selection menu
Currently, there are 5 display languages available:
• German
• English
• Spanish
• French
• Italian
The display language and the language of the webConfig user interface are synchronised.
The setting in the display affects the webConfig tool and vice versa.
100
Com submenu
Level 4
Level 5
Framing
RX
1)
protocol
TX
Address for-
mat
Address
multiNet
Maximum no.
master
of slaves
multiNet
Slave address Value from 0 to 31
slave
i
is configured as a stand-alone device or a network master, the framing pro-
BCL 500
Selection/configuration option
Description
2)
Prefix 1 ... 3
Prefix 1 ... 3
BCC mode
Control character definition for transmit data
Prefix 1 ... 3
Prefix 1 ... 3
BCC mode
Control character definition for received
data
No address
Binary address
ASCII address
Automatic address
Value from 0 to 31
Value from 0 to 31
If the BCL
500i
in the Operating mode
menu item has been configured as a net-
work master, the maximum number of
slaves that the master manages must be set
here.
If the BCL
500i
in the Operating mode menu
item has been configured as a network
slave, the slave address must be set here.
i
and the host are exchanged. The fram-
i
i
\ BCL 501
Standard
STX, NULL, NULL
CR, LF, NULL
None
STX, NULL, NULL
CR, LF, NULL
None
No address
0
1
1
Leuze electronic
Advertisement
Table of Contents
