Installation and mounting
6.2
Mounting the BCL 500
The BCL 500
• Using two M4x6 screws on the rear of the device or using four M4x6 screws on the
bottom of the device.
• Using a BT 56 mounting device on the two fastening grooves.
6.2.1
Fastening with M4 x 6 screws
Figure 6.2:
64
i
\ BCL 501
i
\ BCL 501
i
barcode readers can be mounted in two different ways:
Fastening options using M4x6 threaded holes
BCL 500
i
i
i
\ BCL 501
Leuze electronic