Table of Contents
Advertisement
3.4.2 X.11 configuration
For the X.11 configuration of A
figuration purposes with the following keys pressed simultaneously:
<Ctrl> <Alt> <Backspace>
Now, back in line mode log in as root! The factory set password for root is barco:
eos login: root
Password: barco
Configuration can be carried out by means of the configuration script EOSconfig. To start this script change the
directory first:
eos:/root # cd /opt/MMT2686/config/
then execute the script:
eos:/opt/MMT2686/config # ./EOSconfig
EOSconfig will guide you through the configuration. You can exit configuration without saving the modifications
at any time by pressing simultaneously:
<Ctrl> C
Thus all parameters entered up to now were deleted again. It is more convenient however to check all data nec-
essary for configuration first and then start the script. Therefore you are recommended to read through the fol-
lowing pages of this section before starting the configuration.
Below you can read through a typical course of the configuration script expanded with comments giving more
details.
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
the script call must be entered in line mode. Therefore leave X.11 for con-
RGUS
________________________________________________________________________
3. Getting started
3-43
Advertisement
Table of Contents
