Hot-Keys - Barco Argus X Terminal User Manual

4.7.4 Hot-keys ys
The commands for controlling the illumination units of an O
keys on the A keyboard.
RGUS

hot-keys

C - S -
TRL LEFT HIFT LEFT
C - S -
TRL LEFT HIFT LEFT
C - S -
TRL LEFT HIFT LEFT
C - S -
TRL LEFT HIFT LEFT
The keys Ctrl-left (left Control key) and Shift-left (left Shift key) must be pressed until the hot-key sequence is
finished by entering the number of the respective projection module and the desired command.
In the configuration file of A
Advanced Argus
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
<number of module>
<number of module>
<number of unit>
<number of unit>
the hot-keys can be re-configured. See section
RGUS
configuration.
V display wall can be entered directly with hot-
VER IEW
meaning
o Switching on lamp
f Switching off lamp
a Switching to analog input/In 1
d Switching to digital input/In 2
________________________________________________________________________
4. Operating
Table 4-39
6.2.6
4-53