Multiport I/O Card - Barco Argus X Terminal User Manual

6.1.7 Multiport I/O card

The Multiport I/O Card supports two serial devices. Up to three cards can be inserted into one Multiport I/O Card supports two serial devices. Up to three cards can be inserted into one A
Jumper settings
Before inserting a Multiport I/O Card the jumper on the board has to be set in the correct way. The following
positions for JP1 can be chosen:
pin max. speed in bps
2 and 3 921600 1600
1 and 2 115200
Configuration
The configuration script runs automatically after rebooting A
below, depending on the number of inserted Multiport I/O Cards, multiple devices are added:
connection
COM3
COM4 4
COM5
COM6
COM7
COM8
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
meaning
recommended, enhanced speed option
compatibility speed for direct port access
RGUS
device
ttyS2
ttyS3
ttyS4
ttyS5
ttyS6
ttyS7
6. Advanced configuration
jumper setting on Multiport I/O Card
. The devices are named according to the table
number of Multiport I/O Card
1
1
2
2
3
3
commands for the installation of additional serial ports
________________________________________________________________________
.
RGUS
Figure 6-13
Table 6-9
6-14