Table of Contents
Advertisement
Order
The first graphic card in respect to PCI slot numbering identifies itself as primary graphic adapter by lighting the
green LED ED of the respective graphic channel when A
nel, where the system emits diagnostic and status messages during system startup.
For the explicit order of the graphic cards, please refer to the sections
of expansion
cards.
AGX and UGX G
C
RAPHIC
ARDS
Each UGX G
C
provides four ports for connecting projection cubes, monitors or projectors. The upper con-
RAPHIC
ARD
nector contains port 0 and 1, the lower one contains port 2 and 3. Thus the default sequence of the graphic
channels is:
board
port
0
channel
1
Each AGX G
C
provides two ports, the upper one is port 0, the lower one port 1. Thus the default se-
RAPHIC
ARD
quence of the graphic channels is:
board
1
port
0
channel
1
For non default sequence see section
The BAROC projection modules are assigned from left to right (view from in front of the screens) or if arranged in
a square numbered in rows starting at the top left:
This numbering is carried on for distributed systems. For each rendering machine the
modules are numbered as described.
Specifications
For detailed technical specifications of the graphic cards please refer to section
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
may not be mixed within the same system!
1
1
2
3
2
3
4
2
0
1
1
2
3
4
6.2.6 Advanced Argus
1
5
is switched on. The primary graphic adapter is the chan-
RGUS
3.2.15 Argus OmniBus
2
0
1
2
5
6
7
3
0
1
5
6
configuration.
2
3
4
6
7
8
________________________________________________________________________
3. Getting started
and
3.2.16 Arrangement
3
0
1
3
8
9
10
4
0
0
1
7
8
9
Numbering of projection channels
7.1 Technical
data.
2
3
11
12
Figure 3-16
5
1
10
Figure 3-17
Figure 3-18
3-13
Advertisement
Table of Contents
