Table of Contents
Advertisement
The back the O
B
looks like this or similar:
MNI
US
5
6
26b
27b
5
CPU board
6
link interface card
7-13
graphic cards
14-20
O
S
MNI
CALER
21-24
input cards
25
air supply
26a, 26b
power switch (a standard power module, b optional redundant power module)
27a, 27b
mains connection (a standard power module, b optional redundant power module)
28
connection for equipotential bonding conductor
On the upper part of the back of the O
the link interface board [6], followed by graphic cards, O
configuration of A
.
RGUS
On the right of the lower part is the standard mains connection [27a] and the power switch [26a]. On the left
side there might be another mains connection [27b] and the power switch [26b] for a second power module
for redundant operation, depending on the configuration of the A
tion there might be a connection for the equipotential bondig conductor [28].
To protect the O
free of obstructions!
To disconnect the O
mains connection [27a] and [27b]. Therefore the back panel has to be easily accessible!
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
7-13
25
B
there are different cards. On the left there is the CPU board [5] and
MNI
US
B
from overheating, the air supply openings in the case shall be kept
MNI
US
B
from the power supply all power cords have to be pulled of the
MNI
US
14-20
S
and input cards
ut cards [7-24] depending on the
MNI
CALERS
. To the left of the standard mains connec-
RGUS
_________________________________________________________________________
3. Getting started
21-24
28
26a
27a
Figure 3-6
back of A
O
RGUS
MNI
5] and
B
US
3-7
Advertisement
Table of Contents
