Table of Contents
Advertisement
rctrlswitch
The client rctrlswitch can be operated interactively or command-by-command.
The client rctrlswitch can be started as follows:
rctrlswitch [-<option>]
Following options are available:
option
argument
meaning
-h
<hostname>
Specifies hostname or IP address, where the daemon is started.
-p
<port>
Specifies port of the rcrld daemon. (Default should not be changed!)
-e
<exec command>
Specifies desired command.
The rctrlswitch client accepts following commands:
command
enable
disable
reconfig
aux <ctrl number|all> <on|off>
switch <ctrl number|all>
<input,output>
version <ctrl number|all>
help
exit
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
default
local host
13579
meaning
activating auto config mode
deactivating auto config mode
invoking reconfiguration
switching between different inputs
assigning input to output channels (H
VXA
VXA only)
MES
input and output can either be indicated in the form e.g.
1,2 or 2,2 or a shortcut can be used:
thru or =
In1 to Out 1, In2 to Out 2
cross or x
In1 to Out 2, In2 to Out 1
1,both or 1,b In1 to Out 1 and Out2
2,both or 2,b In2 to Out 1 and Out2
returning the version of the device
returning a list and short descriptions of all available com-
mands
Exits the client.
________________________________________________________________________
4. Operating
Table 4-34
DXD and H
ERMES
ER-
Table 4-35
4-47
Advertisement
Table of Contents
