Barco Argus X Terminal User Manual page 30

Depending on the configuration the card is delivered with different adapter cables:
•
Dual-DVI to 2xDVI-D adapter cable:
Digital output for display on projection modules with digital input.
•
Dual-DVI to 2xCRT adapter cable:
Analog output for display on projection modules with analog input.
The DDC capable display devices must be connected to the graphic cards before Argus is
switched on. If they are connected afterwards Argus will not be able to detect them!
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
y devices must be connected to the graphic cards before Argus is
Dual-DVI to 2xDVI-D adapter cable
________________________________________________________________________
3. Getting started
Figure 3-14
VI to 2xDVI-D adapter cable
Figure 3-15
Dual-DVI to 2xCRT adapter cable
3-12