Table of Contents
Advertisement
If your mouse has only two buttons, it is recommended that you enable Emulate3Buttons.
Do you want to enable Emulate3Buttons (yes/no)? [no]: no
X11 big mouse cursor
In particular for big display walls, it can be useful to enlarge the mouse pointer. Indicate the desired magnifica-
tion factor:
Configuring the Big Mouse Cursor
--------------------------------
When using the X Server with high resolution
the standard cursors are hard to track for some people.
Therefore you can define magnified mouse cursors.
Following magnification factors are available:
factor 1
:
factor 2..8
:
Enter the magnification factor [1]: 2
These are your Input Device settings
====================================
- Cursor size:
- Mouse Protocol:
Emulate3Buttons:
ChordMiddle:
Everything correct? (yes/no)? [yes]: y
Settings for the Output Devices
===============================
Please enter the required settings for
- Graphic Accelerator Type (OVT-2682, OVT-2882, AGX-3000 or AGX-3281)
- Output Signal (analog or digital)
- Monitor Resolution (only for analog devices)
- Refresh Rate
- Screen Type (Multi Head or Multi Screen; only monolithic Server)
- Screen Arrangement (only monolithic Server)
Graphic accelerator type
Select the graphic accelerator type respectively the graphic card. A
G
C
.
RAPHIC
ARDS
Setting the Graphic card type
------------------------------
1 - "OVT-2682 (ViRGE/VX)"
2 - "OVT-2882 (ViRGE/MX)"
3 - "AGX-3000"
4 – "AGX-3281"
Enter the graphic card type [3]: 3
Output signal
Select the output signal type.
Configuring the output signal
---------------------------
1 - "Analog"
2 - "Digital"
Enter the output signal
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
standard cursors
magnified cursors
Factor 2
"PS/2 Mouse"
disabled
disabled
[2]: 1
supports exclusively the UGX and AGX
RGUS
________________________________________________________________________
3. Getting started
3-45
Advertisement
Table of Contents
