Table of Contents
Advertisement
3.1.2 Argus OmniBus
Each A
O
B
provides eighteen PCI expansion slots. They can be used for Barco's UGX or
RGUS
MNI
US
O
S
, Q
A
MNI
CALERS
UAD
NALOG
Although the backplane of the Argus OmniBus is based on standard 64bit/66MHz PCI bus it
is highly recommended to not insert other cards than those mentioned above.
Other cards will not work due to the missing driver support and there is also a risk to
damage the OmniBus or the inserted cards.
The front view of O
B
MNI
US
1
Securing screws of the ventilation flap
2
Ventilation flap with air supply
3
LED: operating status
4
Push button On/Off
On the front of the A
RGUS
there is an LED D [3], showing the operating status of the
3], showing the operating status of the O
In an OmniBus with redundant power supply the LED [3] is also lightened green, if one of
the two power modules is removed but the remaining power module is working well.
It is not an indicator that redundancy is available!
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
V
C
, B
V
C
IDEO
ARDS
IG
IDEO
ARDS
k due to the missing driver support and there is also a risk to
:
off
red
green
red blinking One of the redundant, hot-plug power modules failed.
O
B
at the bottom to the right there is the On/Off push button [4]. Next to it
MNI
US
, D
RGB I
C
and RGB I
UAL
NPUT
ARDS
OmniBus is based on standard 64bit/66MHz PCI bus it
power switch [26] on the back switched off
26] on the back switched off
power switch [26] switched on, system in stand-by
power switch [26] switched on, O
ther by the On/Off push button [4] or via the remote
power cable by the A
that are currently in the O
B
.
MNI
US
_________________________________________________________________________
3. Getting started
X or AGX G
RAPHIC
C
.
NPUT
ARDS
B
is started, ei-
MNI
US
P
. All power modules
RGUS
ROCESSOR
B
are working well.
MNI
US
Front of the A
C
,
ARDS
Figure 3-5
O
B
RGUS
MNI
US
3-6
Advertisement
Table of Contents
