Barco Argus X Terminal User Manual page 118

rctrlleg
L client rctrlleg can be operated interactively or command-by-command.
The O V -
VER IEW M
The client rctrlleg can be started as follows:
rctrlleg [-<option>]
Following options are available:
option argument
meaning
-h <hostname>
Specifies hostname or IP address, where the daemon is started.
-p <port>
Specifies port of the rcrld daemon. (Default should not be changed!)
-e <exec command>
Specifies desired command.
The client accepts following commands:
command
bulb <number>|all> <on|off>
aux <number>|all> <on|off>
info <number>|all>
help
exit
If the client is operated interactively it prompts rctrlleg>>. The commands can be shortened by unambiguous
short cuts.
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
default
local host
13579
(Default should not be changed!)
meaning
Switching off lamp
Switching to analog controller
Scanning status of O V
VER
Returning a list and short descriptions of all available commands
Exits the client.
________________________________________________________________________
cube
IEW
4. Operating
Table 4-28
Table 4-29
4-44