Barco Argus X Terminal User Manual page 124

Switch
1 A single unit can be specified by scrolling with the arrow buttons
All Send respective command to all connected unit
In 1 for Out 1 Switch first output to first input
In 2 for Out 1 Switch first output to second input
Only applicable for H
ERMES
In 1 for Out 2 Switch second output to first input (color code according to LEDs)
In 2 for Out 2 Switch second output to second input (color code according to LEDs)
H V2A and H
ERMES ERMES
Left Send left command to analog controller
Right Send right command to analog controller
Up Send up command to analog controller
Down Send down command to analog controller
Menu Send menu command to analog controller
Select Send enter command to analog controller
+ Send plus command to analog controller
- Send minus command to analog controller
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
DXD XD and H VXA:
ERMES
VXA only:
________________________________________________________________________
4. Operating
Figure 4-15
4-50