Table of Contents
Advertisement
Inside of the housing there is a transportation lock, which must also be removed to be able to insert expansion
cards. Loosen the screws 4, 5 (and 6) and take out the plate.
Before closing the housing the transportation lock must be readjusted. Therefore first insert the plate, then turn
in the screws but do not tighten them. Push the plate as far towards the cards as possible. Just then tighten the
screws.
4
PCI slots
CI slots
On the mainboard of the A
A
P
are meant to insert network cards to connect to the network, link interface cards to connect to
RGUS
ROCESSOR
the A
O
B
and Multiport I/O Cards.
RGUS
MNI
US
Barco recommends certain expansion cards for the use in A
at your own risk. The described graphic and video capabilities of A
with the original expansion cards from Barco.
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
P
there are six PCI slots for inserting expansion cards. The PCI slots of the
RGUS
ROCESSOR
5
4
Transportation lock of the A
and of the A
P
AGS-3328 for redundant operation (right)
RGUS
ROCESSOR
! If you use other cards it is
RGUS
_________________________________________________________________________
6. Advanced configuration
xpansion
6
Figure 6-3
P
AGS-3270 (left)
RGUS
ROCESSOR
Figure 6-4
PCI slots of A
P
RGUS
ROCESSOR
are only available
RGUS
6-3
Advertisement
Table of Contents
