Barco Argus X Terminal User Manual page 122

Additionally, for a H
ERMES
nals following commands are available:
command
left <ctrl number>
right < ctrl number>
up <ctrl number>
down <ctrl number>
menu <ctrl number>
enter < ctrl number>
+ <ctrl number>
- <ctrl number>
If the client is operated interactively it prompts rctrlswitch>>. The commands can be abbreviated by unam-
biguous short cuts.
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
V2A or a H VXA, which is equipped with an analog controller for RGB or video si
ERMES
Meaning
sending left command to analog controller
sending right command to analog controller
sending up command to analog controller
sending down command to analog controller
sending menu command to analog controller
sending enter command to analog controller
sending plus command to analog controller
sending minus command to analog controller
________________________________________________________________________
4. Operating
GB or video sig-
Table 4-36
4-48