Table of Contents
Advertisement
The separate-screens mode allows displaying multiple screens on multiple display walls and single projection
modules. Nevertheless it is required, that the pixel resolution of each projection module that is used to display
the different screens is identical.
To use separate-screens the keyword SeparateScreens must be written in a line of the geometry section. As
with contiguous-screens each following line contains the information of one screen, but the position must not be
indicated.
With separate-screens the cursor is first displayed on screen 0. Moving the cursor out of screen 0 to the right lets
the cursor enter screen 1 on the left side. It will enter screen 1 on the same ratio of height as it has left screen 0.
This can be continued until the screen with the highest number displays the cursor. Moving out to the right usu-
ally brings the cursor again on screen 0. This can be prevented by the keyword NoCursorWrap. This keyword
can be inserted in any single line of the geometry section.
geometry
SeparateScreens
engine-0
4x2
bpp 16
engine-1
1x1
engine-2
2x2
NoCursorWrap
video
This section starts with the keyword video and defines the assignment of the adapters of B
Q
A
V
C
UAD
NALOG
IDEO
ARDS
the display wall. This section needs not to be changed manually but by aid of the script EOSconfig, see section
3.4.3 Configuring a distributed
Adapters of Quad Analog Video Cards and of Big Video Cards may not be combined to one
common logical video channel!
If the video section does not contain any data, A
number of rendering machines entered in the configuration script. The first video adapter of each rendering ma-
chine is assigned to the first video channel, the second video adapter to the second video channel etc. The total
number of video channels is thus equal to the maximum number of video adapters inserted in a single rendering
machine.
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
It will enter screen 1 on the same ratio of height as it has left screen 0.
cc 5
to video channels. This assignment specifies which video is displayed on which part of
system.
Rendering 1
Channel 1
A
RGUS
Channel 2
Channel 3
0
Rendering 0
A
RGUS
A
RGUS
applies default settings. These settings depend on the
RGUS
Rendering 2
Rendering 3
RGUS
A
RGUS
A
________________________________________________________________________
6. Advanced configuration
2
1
Rendering 1
Rendering 2
A
RGUS
A
RGUS
A
RGUS
A
RGUS
A
RGUS
Three independent screens in separate mode
V
IG
IDEO
Figure 6-25
C
or
ARDS
Figure 6-26
6-24
Advertisement
Table of Contents
