Rgb Input Card - Barco Argus X Terminal User Manual

3.2.10 RGB Input Card

The RGB I C provides the capability of displaying RGB monitor signals. The analog signals are digitized for
NPUT ARD
further processing in A
RGUS
The RGB Input Card is available in various versions; only RGB Input Cards with version
RGB-2774-14 or higher are supported by the OmniBus.
Standard
The synchronization modes Hsync+Vsync
Connectors
The RGB I C has two VGA compatible 15-pin SubMinD connectors. The
NPUT ARD
signal to the O B whereas RGB Out can be connected to an additional monitor which will receive the looped
MNI US
through signal.
Order
The order in that the input cards are inserted into one or more O
Argus OmniBus and 3.2.16 Arrangement of expansion
Specifications
For detailed technical specifications of the RGB I
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
.
Vsync, Csync and Sync-on-Green are supported.
RGB In
RGB Out
cards.
NPUT
SubMinD connectors. The RGB In is for connecting the RGB
B devices is given in the sections
MNI US
C please refer to section
ARD
________________________________________________________________________
3. Getting started
with version
Figure 3-25
RGB I
7.1 Technical data.
C
NPUT ARD
3.2.15
3-20