Displaying Rgb-Signals; Configuration Of Rgb Input - Barco Argus User Manual

4.3.5 5 Displaying RGB-signals

With a right click on the window of an RGB source the control panel for RGB input can be opened.
Setting of red
Red
Setting of green
Green
Setting of blue
Blue
Setting of brightness
Setting of the dynamic reduction rate
Reduction
Red, green and blue are identically changed
Lock RGB
Scaling up of the video to the whole display wall or in Display mode to the projection mod-
Fullscreen
ules, which currently display a part of it
Freeze / return to play
if the source is frozen the seven above mentioned settings can not be changed
Only selectable for D
Detect Signal
If selected in case of a signal loss a blue window is displayed. Else the last picture is displayed
as freeze image.
The RGB-I
Source 1 (RGB)
0
Format Source
Display
Manual
Preset Auto
<screen modes>
Edit the preset.
Edit
Create new preset.
New
When starting the video software for the first time default values for the respective monitor parameters are
automatically applied. Since the graphic cards from different manufacturers differ slightly despite having the
same mode usually some corrections to the default values have to be made. Please, refer to section
Configuration of RGB input.
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
window of an RGB source the control panel for RGB input can be opened.
RGB I
UAL NPUT
C displays always in case of signal loss a blue window.
NPUT ARD
Select a monitor signal
The input is switched off. A blue window is displayed
The aspect ratio of the input signal is preserved.
The aspect ratio of the video window is preserved. If the aspect ratio of the
input signal differs from the aspect ratio of the video window, the dis-
played image will be distorted.
The aspect ratio of the video window can be freely changed.
Enable automatic detection of the screen mode. (The detected screen mode
is displayed, but automatic detection remains.)
The names of the screen modes stored in the active preset file are listed
(the names of the presets in the default preset file
are combinations of resolution and refresh rate).
C and if a preset is selected manually:
ARD
A blue window is displayed
_________________________________________________________________________
4. Operating
Figure 4-10
RGB window and dialog box
or
rgb2774.prs rgb3010.prs 3010.prs
Table 4-13
Video dialog box – RGB sources
4.3.6
4-23