Table of Contents
Advertisement
4.6.4 Displaying video and RGB signals
Control Panel for Quad Analog Video Card
C
Set contrast of video display
B
Set brightness of video display
S
Set saturation of video display
Live
Start video display
Still
Freeze video display
QAVC 1
Select video card (the cards can be renamed) )
Channel 1
Select video channel of the Q
renamed)
Encoding
Shows the detected video standard (PAL, NTSC, SECAM)
Signal
Select recording standard (VHS, S-VHS)
Fps
Select the frame rate (FULL, HALF)
Configuration of the video display
In the Control Panel you can adjust the video display regarding hue, saturation and brightness etc.
The video client can store these settings as well as the selected video channel in a configuration file. From the
File menu you can choose to save the current configuration or read in other.
A certain configuration file can also be invoked as an option on the command line when starting the video client.
Please, refer to section
4.6.5 The
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
A
UAD
NALOG
FULL, HALF)
options.
V
C
(max. 4 channels; the channels can be
IDEO
ARD
________________________________________________________________________
4. Operating
Figure 4-4
Xvideo control panel
Figure 4-5
4-19
Advertisement
Table of Contents
