Table of Contents
Advertisement
On the left hand side is the mains connection [25]. At the case of the A
there is for both of the two power modules a mains connection [25] and additionally a power switch [35] and
an LED [36], indicating operation of the power module, if lightened. In the middle of the power modules there is
6], indicating operation of the power module, if lightened. In the middle of the power modules there is
the air supply [14].
The remote power on/off connector [16] is for connection to A
nectors external genlock in
connected to multiple P
PS/2 keyboard [27] is for plugging in a PS/2 keyboard. If available with network adapter [32] the network
connection can be established.
On the right hand side there are different cards [19-24] inserted depending on the actual hardware configuration
of your A
P
.
RGUS
ROCESSOR
To protect A
kept free of obstructions!
To disconnect A
the mains connection [25]. Therefore the back panel has to be easily accessible!
The expansion slots
The A
P
provides six PCI expansion slots for insertion of link interface cards, network cards, VGA
RGUS
ROCESSOR
graphic card and Multiport I/O Cards. Depending on the model of the
models AGS-3328-2 and AGS-3328-3 they are numbered in the following way:
In the models AGS-3270-0, AGS-3328-0 and AGS-3328-1 they are numbered in the following way:
In the following sections reference is taken to the numbering of the slots.
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
k in [17] and external genlock loop through in [15] an external genlock signal can be
and O
B
devices. PS/2 mouse [26] is for plugging in a PS/2 mouse and
ROCESSORS
MNI
US
P
from overheating, the air supply openings in the case shall be
RGUS
ROCESSOR
P
from the power supply all power cords have to be pulled of
RGUS
ROCESSOR
5]. Therefore the back panel has to be easily accessible!
O Cards. Depending on the model of the P
PCI 1 PCI 2 PCI 3 PCI 4 PCI 5 PCI 6
numbering of PCI slots on the back panel of A
O
RGUS
MNI
9-24] inserted depending on the actual hardware configuration
numbering of PCI slots on the back panel of
_________________________________________________________________________
3. Getting started
P
for redundant operation
RGUS
ROCESSOR
B
devices. With the optional con-
US
, the numbering varies. In the
ROCESSOR
panel of A
P
RGUS
ROCESSOR
P
AGS-3270, AGS-3328-0/1
RGUS
ROCESSOR
be
Figure 3-3
AGS-3328-2/3
Figure 3-4
3-5
Advertisement
Table of Contents
