Graphic Cards - Barco Argus X Terminal User Manual

3.2.5 Graphic cards

The DDC capable UGX and AGX G
mode) or for connecting Barco projection modules (digital mode) to an A
board they can easily be switched between analog and digital mode.
For A systems with digital output and video or RGB insertions the output of the graphic cards is led over to
RGUS
O S and then connected to the display device. Please refer to section
MNI CALERS
UGX Graphic Card
The UGX G X G C provides two Dual-DVI connectors to connect four display devices. For digital output, reso-
RAPHIC ARD
lutions up to UXGA can be processed.
AGX Graphic Card
The AGX G C provides one Dual-DVI connector to connect two display devices. For digital output, resolu-
RAPHIC ARD
tions up to SXGA can be processed.
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
C provide the facility for connecting CRT monitors or projectors (analog vide the facility for connecting CRT monitors or projectors (analog
RAPHIC ARDS
port 0/1 out
port 2/3 out
LED port 2/3
. By means of a rotary switch on the
RGUS
3.2.6 OmniScaler.
________________________________________________________________________
3. Getting started
Figure 3-12
Ports of UGX G C
RAPHIC ARD
Figure 3-13
Ports of AGX G C
RAPHIC ARD
3-11