Opening The Case Of Argus Omnibus - Barco Argus X Terminal User Manual

6.1.2 Opening the case of Argus OmniBus

Before opening the case, switch off A
power plugs! Remove all cables!
The boards of A
destroyed!
Loosen the screws [1 - 3] shown in the figure above on the back of the case. For these screws as well as for the
screws inside of the A
RGUS
P can be loosened with a 5.5 spanner as well.
ROCESSOR
Tear the top cover backwards unless it is not longer fixed to the sides of the housing. Now it can be easily r
moved.
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
contain CMOS MOS components. Do not touch the components, they could be
RGUS
P you need a size 2 Phillips screwdriver. Some screws inside the A
ROCESSOR
with the power button on the back! Disconnect all
RGUS
Position of screws on the back of A
Screws on the back of the case of the A
_________________________________________________________________________
6. Advanced configuration
Figure 6-5
O B
RGUS MNI
RGUS
Figure 6-6
P
RGUS ROCESSOR
Now it can be easily re-
6-4
US