Release Integrity Utility (Eosinfo) - Barco Argus X Terminal User Manual

4.8.6 Release integrity utility (eosinfo)

The integrity of the current installation can easily be checked by means of the eosinfo utility. If eosinfo is
entered into the command line, all RPM packages that are installed will be returned. This might look like the
following list:
This are the Factory shipped RPM Packages (Rel 2.5.0):
–---------------------------------------------------
eosbigcursor-2.4.0-1
eoscfg-2.5.0-1
eosconfig-2.5.0-1
eosdiskless-2.5.0-1
eosmisc-2.5.0-1
eosrctrl-2.4.0-1
eosuser-2.4.0-1
eosutil-2.4.0-1
eosvwm2cfg-2.5.0-1
osxblink-2.4.0-1
eosxmc-2.4.0-1
eosxserver-dis-2.5.0-1
eosxserver-mon-2.5.0-1
eosxtest-2.4.0-1
eosxtrap-2.4.0-1
eosxvideo-2.4.0-1
–---------------------------------------------------
The EOS System is in a save state
If there are RPM packages installed on the hard disk that do not belong to the current release or if there are
appendant RPM packages missing, this is specially marked in the list and might look like the following:
This are the Factory shipped RPM Packages (Rel 2.5.0):
–---------------------------------------------------
eosbigcursor-2.4.0-1
eoscfg-2.5.0-1
eosconfig-2.5.0-1
eosdiskless-2.5.0-1
eosmisc-2.5.0-1
eosrctrl-2.4.0-1
eosuser-2.4.0-1
eosutil-2.4.0-1
eosvwm2cfg-2.5.0-1
eosxblink-2.4.0-1
eosxmc-2.4.0-1
eosxserver-dis-2.5.0-1
eosxserver-mon-2.5.0-1
eosxtest-2.4.0-1
eosxtrap-2.4.0-1
eosxvideo-2.4.0-1
–---------------------------------------------------
WARNING!!
The following EOS RPM Package(s) have been altered:
–-------------------------------------------------
eosxserver-mon-2.5.0-1
eosxvideo-2.4.0-1
–-------------------------------------------------
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
M packages that are installed will be returned. This might look like the
________________________________________________________________________
4. Operating
4-58