Table of Contents
Advertisement
Control panel for Big Video Card
C
Set contrast of video display
B
Set brightness of video display
S
Set saturation of video display
Live
Start video display.
Still
Freeze video display.
ze video display.
BVC 1
Select a B
Port 1
Select port of B
Encoding
Shows the detected video standard (PAL, NTSC, SECAM)
Signal
Select recording standard (VHS, S-VHS)
Fps
Select the frame rate (FULL, HALF)
Configuration of the video display
In the Control Panel you can adjust the video display regarding hue, saturation and brightness etc.
The video client can store these settings as well as the selected video channel in a configuration file. From the
File menu you can choose to save the current configuration or read in other.
A certain configuration file can also be invoked as an option on the command line when starting the video client.
Please, refer to section
4.6.5 The
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
V
C
(the channels can be renamed)
IG
IDEO
ARD
V
C
(max. 3 ports; the ports can be renamed)
IG
IDEO
ARD
ked as an option on the command line when starting the video client.
options.
M)
________________________________________________________________________
4. Operating
Figure 4-6
Xvideo control panel
4-20
Advertisement
Table of Contents
