Barco Argus X Terminal User Manual page 58

Network configuration
Select Config : Networking : Client Tasks : Host name and IP network devices.
Up to four network cards are automatically detected during the system installation. This means the settings for
net device and kernel module are correct if the cards have been present during installation. If a card is inserted
afterwards also these settings have to be adopted. The drivers (Setting: Kernel module) for the different net-
work cards are:
driver network card
eepro100 Ethernetcard 10/100
e100 Ethernetcard 10/100 Mbps, PCI
e1000 Ethernetcard 10/100/1000 Mbps, PCI
bcm4400 onboard LAN adapter
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
0/100 Mbps, PCI
redundancy
no
possible
possible
no
________________________________________________________________________
3. Getting started
Figure 3-46
3-40