Table of Contents
Advertisement
Enter query type
Enter the ip address of your XDM [150.158.181.149]: 199.123.222.17
Font server
Please specify, if you want to use a font server. If necessary clarify the IP address as well as the respective port
number with your network administrator!
Configuring the Font Server
---------------------------
If you want a Font Server which supplies fonts for the X Server,
please answer the following question with either 'y' or 'n'
Do you want to use a Font Server (yes/no)? [yes]: y
Enter the ip address of your Font Server [150.158.181.149]: 199.123.222.17
Enter the Font Server's port number [7100]: 7100
The script lists your settings. Examine the values and confirm them by entering y or enter n for repeating the
previous configuration steps.
These are your X Server General Settings
========================================
- Bits Per Pixel:
- Visual Class:
- X Server's RGB Values: 40 40 200
- XDM Protocol:
- Font Server:
Everything correct? (yes/no)? [yes]: y
Channel reordering
For some installations it is useful to change the order of the projection channels. This can be assigned in the
Channel Reordering section. If you want to reorder the projection channels enter y. By entering n this section will
be skipped.
X Server's Channel Reordering
=============================
This is the reordering configuration part of the X Server.
It offers the possibility to define the reordering channels section.
The channels section defines the assignment of graphic channels
to projection channels.
Please read the section "X Server Configuration" in the
User's Manual "Eos X Terminal"
Do you want to proceed
The correlation between graphic channels and projection channels is explained in section
configuration
(channels). Please have a look there to have a further explanation.
Channel Reordering
==================
Assign to a default graphic channel
a new position in the Display Wall
Channel Reordering:
------------------
1: redefine reordering
2: take default (no reordering)
Enter selection [1]: 1
Enter the list of the default channels [1 2]: 1 2 3 4 5 6 7 8
Enter the list of the new channels [2 1]: 1 3 5 7 2 4 6 8
These are the Reordering Settings for the Monolithic X Server:
=============================================================
1 2 3 4 5 6 7 8 --> 1 3 5 7 2 4 6 8
Everything correct? (yes/no)? [yes]: y
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 04 – May-2004
[2]: 2
16
TrueColor
-indirect 199.123.222.17
tcp/199.123.222.17:7100
(yes/no)? [no]: y
________________________________________________________________________
3. Getting started
6.2.6 Advanced Argus
3-48
Advertisement
Table of Contents
