Enabling/Disabling Group Authentication - Kyocera ECOSYS M2030dn Operation Manual

Enabling/Disabling Group Authentication

This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.] is
selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide of the
LDAP server.
Use the procedure below to enable group authentication.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
4
*********************
User/Job Account
5
User Property
6
Common Settings
Login User Name:
*******************
Login Password:
User/Job Account: a b
1
*********************
User Login Set.
2
Job Account. Set.
3
Unknown ID Job
User Login Set.:
1
*********************
User Login
2
Local User List
3
Group Auth.
3
In the delete confirmation screen, press [Yes] (the Left
Select key). The user is deleted and the screen returns
to Local User List.
1
Press the System Menu/Counter key on the main unit
operation panel.
2
Press the  or  key to select [User/Job Account].
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
3
The User/Job Account menu appears.
4
Press the  or  key to select [User Login Set.].
[ Exit ]
5
Press the OK key. The User Login Set. menu appears.
a b
[ Exit ]
6
Press the  or  key to select [Group Auth.].
11-11
Management
11