Good Read Led; Good Read Led Duration - CipherLab 2564 User Manual

2564 Barcode Scanner

1.3.1 GOOD READ LED

1.3.2 GOOD READ LED DURATION

By default, the Good Read LED stays on for 40 milliseconds. Specify a value, ranging
from 1 to 254 in units of 10 milliseconds.
1) Read the barcode above to specify the time interval before the Good Read LED goes
off.
2) Read the "Decimal
LED to go off after 150 milliseconds.
3) Read the "Validate" barcode on the same page to complete this setting.
30
User Guide
Value" barcode on page 251. For example, read "1" and "5" for the
*Enable
Good Read LED
Disable
Good Read LED
Good Read LED
Time-out after
0.01~2.54 sec.
(*40 ms)
Enter Setup