Create One-Scan Setup Barcodes; One-Scan Barcode - CipherLab 2564 User Manual

Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь отображат

CREATE ONE-SCAN SETUP BARCODES

Most of the scanner parameters require only one read for setting new values. To facilitate
configuring the scanner, create One-Scan setup barcodes for use.
1D ONE-SCAN BARCODE
The requirements of a One-Scan setup barcode are:
a prefix of the "#@" characters

the six digits of command parameters

a suffix of the "#"character

For example, the scanner needs reading three setup barcodes for the command
parameter "109952" to take effect:
Now, it requires only one read:
Note: The scanner will restart automatically upon reading the One-Scan setup barcode
for changing the interface. It will respond with a long beep and its LED will come
on-off shortly.
Enter Setup
One-Scan Setup Barcode
for 109952
List Page 3
Update
Update
19