Entering Pin Code For Authentication; Use Preset Pin - CipherLab 2564 User Manual

Appendix IV Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен зде

ENTERING PIN CODE FOR AUTHENTICATION

USE PRESET PIN

1) In the configuration mode, read the barcode below to use a preset PIN for
authentication.
2) Read one of the barcodes to specify the PIN code, in decimal or hexadecimal.
By default, the PIN code is set to "0000". Maximum 16 characters are allowed.
3) Read the "Decimal Value" barcode on page 265 or the "Hexadecimal Value" barcode
on page 266 for the desired digits or character string.
Read the "Clear PIN Code" barcode first if you need to re-input the PIN code.
4) Read the "Validate" barcode to complete this setting.
Update
Use Preset PIN
Enter PIN in
Hexadecimal...
Enter PIN in
Decimal...
Clear PIN Code
Abort
255