1500 Barcode Scanner
1.3 LED INDICATOR
The dual-color LED on top of the scanner is used to provide user feedback. For example,
the LED becomes solid red and goes off quickly (= Standby mode) upon powering on or
running out of transmit buffer. You may tell the difference by the beeps – for example,
you will hear a long beep of high tone when powering on the scanner, and a long beep of
low tone when the transmit buffer becomes full.
LED – Red/Green
Red, and goes off quickly
Green, and goes off quickly
Flashing red
1.3.1 GOOD READ LED
*Enable Good Read LED
12
User Guide
Meaning
Power on, with one long beep (high tone)
Transmit buffer full, with one long beep (low tone)
RS-232 connection fails, with two beeps (high-low tone)
Good Read, with one short beep (high tone) and beeper pitch
and duration programmable
Configuration Mode
Disable Good Read LED
Enter Setup