Memory Mode - CipherLab 2564 User Manual

Chapter 1 Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь

1.2.2 MEMORY MODE

The scanner keeps 4 MB flash memory for memory mode operation. When the scanner is
in memory mode, it means any real-time connection established with host is disabled.
Warning: No real-time connection is allowed unless the memory mode is disabled.
Memory Data Delay
You may set a delay between each data record while transmitting data back to the host.
Enable
*Disable
*None
250 ms
500 ms
1 sec
2 sec
3 sec
5 sec
Update
27