Activate Bt Hid & Select Keyboard Type - CipherLab 2564 User Manual

Chapter 2 Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь
2.1.1 ACTIVATE BT HID & SELECT KEYBOARD TYPE
When BT HID interface is activated, you will have to select a keyboard type to complete
this setting. By default, BT HID is activated on the scanner, and the keyboard type is set
to PCAT (US).
1) Read the barcode above to activate BT HID and select a keyboard type.
2) Read the "Decimal
number of desired keyboard type.
3) Read the "Validate" barcode on the same page to complete this setting.
BT HID
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported —
No. Keyboard Type
64 PCAT (US)
65 PCAT (French)
66 PCAT (German)
67 PCAT (Italy)
68 PCAT (Swedish)
69 PCAT (Norwegian)
70 PCAT (UK)
71 PCAT (Belgium)
72 PCAT (Spanish)
73 PCAT (Portuguese)
74 PS55 A01-2 (Japanese)
75 User-defined table
76 PCAT (Turkish)
77 PCAT (Hungarian)
Value" barcode on page 251. Refer to the table below for the
Activate BT HID &
Select Keyboard
Type...
No. Keyboard Type
78 PCAT (Swiss German)
79 PCAT (Danish)
80 Reserved
81 Reserved
82 Reserved
83 PCAT (Russian)
84 Reserved
85 Reserved
86 Reserved
87 Reserved
88 PCAT (Cyrillic on Russian)
89 PCAT (Armenian)
90 PCAT (Thai)
Update
49