CipherLab 2564 User Manual page 179

Chapter 4 Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь
1) Read the barcode above to enable field separator.
2) Read the "Hexadecimal
string.
3) Read the "Validate" barcode to complete this setting.
APPLICATION ID MARK
Decide whether to add an application ID mark (1 character) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the
GS1 data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the "Hexadecimal
3) Read '00' if you want to remove the AI mark.Read the "Validate" barcode to complete
this setting.
System" barcode on page 252 for the desired character
System" barcode on page 252 for the desired character.
Specify Field
Separator...
AIMark1
AIMark2
Update
165