Pause Field Setting - CipherLab 2564 User Manual

2564 Barcode Scanner

6.4.5 PAUSE FIELD SETTING

Pause Field Time
Limit the pause time interval (1~16). By default, it is set to 1 second.
1. Read the barcode above to specify the time interval for the Pause Field. (It is set to 1 by
default.)
2. Read the "Decimal
Pause Field Time to 10 seconds.
3. Read the "Validate" barcode on the same page to complete this setting.
226
User Guide
Value" barcode on page 251. For example, read "1" and "0" for setting the
Pause Field Time
1~16 sec.
(*1)
End Programming Format