Hid Character Transmit Mode; Special Keyboard Feature; Usb Hid Via Cradle Auto-Reconnection - CipherLab 2564 User Manual

2564 Barcode Scanner

2.6.5 HID CHARACTER TRANSMIT MODE

By default, HID interface sends data to the host character by character. You may have
the scanner read the "Batch Processing" barcode to process data in batch.
Note: "By Character" transmit mode is required when working with iPhone or iPad.

2.6.6 SPECIAL KEYBOARD FEATURE

By default, this interface employs special function codes (0x01 ~ 0x1F) defined in the
Keyboard Wedge Table. However, users may want to get rid of these special codes within
the barcodes to avoid data error. You can decide whether to apply the special keyboard
feature. For further details please refer to

2.6.7 USB HID VIA CRADLE AUTO-RECONNECTION

Users can decide whether to have the scanner automatically reconnect to a paired device
after disconnection, and the occasion for reconnecting.
92
User Guide
Batch Processing
*By Character
Keyboard Wedge Table.
*Apply
Bypass
*Auto reconnect
immediately
Auto reconnect on
data scanned
Enter Setup