Chapter 2
Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь
2.3.4 SWITCH BETWEEN MASTER/SLAVE MODES
After the scanner has established a connection as a SPP slave device, you may have it
read the "Activate BT SPP, Master Mode" setup barcode to switch to SPP Master Mode.
This will result in easy and reliable re-connection, just like connecting with the cradle.
2.3.5 BT SPP MASTER HARDWARE FLOW CONTROL
By default, the data sending via Bluetooth SPP doesn't employ hardware flow control. In
some cases users may want to enable hardware flow control to prevent data loss during
transmission. Please scan the barcode below to enable/disable it.
*Disable
Enable
2.3.6 BT SPP MASTER AUTO-RECONNECTION
Users can decide whether to have the scanner automatically reconnect to a paired device
after disconnection, and the occasion for reconnecting.
*Auto reconnect
immediately
Auto reconnect on
data scanned
Auto reconnect off
67
Update