Field Settings - CipherLab 2564 User Manual

2564 Barcode Scanner

6.4.4 FIELD SETTINGS

Data eligible for editing formats is divided into fields by user-specified rules – either
using the field terminating string or specified field length.
By Terminating String
Specify the field terminating string. Up to two characters are allowed. The scanner will search for
the occurrence of this particular string in the data.

By default, this string will be included in the field.
By Length
Alternatively, you may simply specify the field length. The scanner will assign the next specified
number of characters into the field.
Field 1 Setting
1. Read the barcode below to divide field 1 by a specified terminating string.
2. Read the "Hexadecimal
3. Read the "Validate" barcode to complete this setting.
4. Read the "Discard Separator" barcode if the field separator is not desired in the field.
If not dividing the field by a specific separator, you may divide it by a specified length.
1. Read the barcode below to divide field 1 by length.
2. Read the "Decimal
3. Read the "Validate" barcode on the same page to complete this setting.
220
User Guide
Value" barcode on page 252 for the desired character string.
Value" barcode on page 251 for the desired field length.
Select
Field Separator
to Divide Field 1...
*Include Separator
Discard Separator
Divide Field 1
by Length
End Programming Format