Prefix/Suffix Code - CipherLab 2564 User Manual

2564 Barcode Scanner

5.3 PREFIX/SUFFIX CODE

By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured
to be suffix code. Up to 8 characters can be configured, for example, "Barcode_", and
have the string appear in front of the barcode read, like this – "Barcode_1234567890".
 If "Keyboard Wedge" or "USB HID" is configured for interface,
Status will then become applicable. Decide whether to apply Key Status when select
"Normal Key" for Key Type.
Key Type
Scan Code Up to 4 scan code values are allowed.
Normal Key Up to 8 character strings are allowed.
1) Read the barcode above to apply prefix code or suffix code separately, and follow
steps 2~3. (Max. 8 characters each)
2) Read the "Hexadecimal
For example, read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" barcode to complete this setting.
180
User Guide
Value" barcode on page 252 for the desired character string.
Key Status
N/A

Add Shift

Add Left Ctrl

Add Left Alt

Add Right Ctrl

Add Right Alt
Refer to Keyboard Wedge
Configure Prefix
Configure Suffix
Enter Setup
Key Type and Key
Table.