Character Substitution - CipherLab 2564 User Manual

2564 Barcode Scanner

5.2 CHARACTER SUBSTITUTION

Character substitution is performed on every occurrence of the first character specified. If
only one character is specified, each time the character occurs in the barcode will be
taken away.
 The first character will be replaced by the second character(s).
Up to three sets of character substitution can be configured.

If "Keyboard Wedge" or "USB HID" is configured for interface,

Status will then become applicable. Decide whether or not to apply Key Status when
"Normal Key" is selected for Key Type.
Key Type
Scan Code Only 1 scan code value is allowed.
Refer
Character
Normal Key Up to 3 character strings are allowed.
Note: The character substitution is performed only on the barcode itself and before the
processing of editing formats. It is not applicable to the Prefix/Suffix Code, Code
ID, Length Code, or any Additional Field.
170
User Guide
to 5.2.1 Select a
Substituion.
Key Status
N/A
Set for

Add Shift

Add Left Ctrl

Add Left Alt

Add Right Ctrl

Add Right Alt
Refer to Keyboard Wedge
Key Type
Table.
Enter Setup
and Key