Inter-Function Delay; Hid Character Transmit Mode - CipherLab 2564 User Manual

Chapter 2 Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь

2.1.5 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
1) Read the barcode above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.

2.1.6 HID CHARACTER TRANSMIT MODE

By default, HID interface sends data to the host character by character. You may have
the scanner read the "Batch Processing" barcode to process data in batch.
Note: "By Character" transmit mode is required when working with iPhone or iPad. It's
recommended that the Auto-Correction function on your iOS keyboard should be
turned off.
Value" barcode on page 251 for the desired inter-function delay
Inter-Function
Delay... (*0~254)
Batch Processing
*By Character
Update
57