Gs1 Formatting; Application Id Mark - CipherLab 2564 User Manual

2564 Barcode Scanner

4.10.3 GS1 FORMATTING

Decide whether to enable GS1 formatting for GS1-128.

4.10.4 APPLICATION ID MARK

Decide whether to add an application ID mark (1 character) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the
GS1 data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the "Hexadecimal
'00' if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
140
User Guide
System" barcode on page 252 for the desired character. Read
Enable
*Disable
AIMark1
AIMark2
Enter Setup