Good Read Led; Good Read Led Duration - CipherLab 1564 User Manual

1.3.1 GOOD READ LED

1.3.2 GOOD READ LED DURATION

By default, the Good Read LED stays on for 40 milliseconds. Specify a value, ranging
from 1 to 254 in units of 10 milliseconds.
1) Read the barcode above to specify the time interval before the Good Read LED goes
off.
2) Read the
"Decimal
and "5" for the LED to go off after 150 milliseconds.
3) Read the "Validate" barcode on the same page to complete this setting.
Value" barcode on page 錯誤! 尚未定義書籤。. For example, read "1"
*Enable
Good Read LED
Disable
Good Read LED
Good Read LED
Time-out after
0.01~2.54 sec.
(*40 ms)
Update
Chapter 1
31