CipherLab 2564 User Manual page 237

Chapter 6 Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь
Field 4 Setting
1. Read the barcode below to divide field 4 by a specified terminating string.
2. Read the "Hexadecimal
3. Read the "Validate" barcode to complete this setting.
4. Read the "Discard Separator" barcode if the field separator is not desired in the field.
If not dividing the field by a specific separator, you may divide it by a specified length.
1. Read the barcode below to divide field 4 by length.
2. Read the "Decimal
3. Read the "Validate" barcode on the same page to complete this setting.
Value" barcode on page 252 for the desired character string.
Value" barcode on page 251 for the desired field length.
Select
Field Separator
to Divide Field 4...
*Include Separator
Discard Separator
Divide Field 4
by Length
Update
223