Special Keyboard Feature; Keyboard Support For Iphone/Ipad; Transmit Speed - CipherLab 2564 User Manual

2564 Barcode Scanner

2.1.7 SPECIAL KEYBOARD FEATURE

By default, this interface employs special function codes (0x01 ~ 0x1F) defined in the
Keyboard Wedge Table. However, users may want to get rid of these special codes within
the barcodes to avoid data error. You can decide whether to apply the special keyboard
feature. For further details please refer to

2.1.8 KEYBOARD SUPPORT FOR IPHONE/IPAD

When the scanner has been successfully connected to iPhone or iPad for data collection,
the onscreen keypad of iPhone/iPad will disappear by default. Have the scanner read the
"Show or Hide Keypad" barcode to show or hide the keypad if necessary.
By default, users can show or hide the onscreen keypad by simply pressing the scanner
trigger key twice within 0.5 seconds. To disable this function, please read the Disable
setting barcode below.
Note: This function only works for
(1) iPhone 4 and 3GS version 4.1 or later, and (2) iPad version 4.2 or later.

2.1.9 TRANSMIT SPEED

By default, the BT HID transmit speed is set to Fast. Users can have the scanner work in
normal speed by reading the Normal barcode.
58
User Guide
Keyboard Wedge Table.
*Apply
Bypass
Show or Hide Keypad
Disable
*Use Trigger Key to
Show or Hide Keypad
Enter Setup